• Contact us about custom orders and designs.

• Box is 48” long, 14” high and 7” deep
• Toolbox extends 4″ over top of truckbox and 4″ up with full length divider
• Comes with hasp
• All joints are glued and fastened with 2” screws
• All edges rounded over and sanded
• Constructed with 3/4″ select fir plywood
• Stain and wood preserver applied after assembly
• Can custom build for specific needs

• 18”, 20” or 24” tool box
• Made for GMC, Ford or Dodge full size pickups
• Constructed with 3/4″ select fir plywood
• 2 lids with hasps and lid supports
• Lids overlap to minimize snow and dust
• 1 screwdriver rack, 1 lift out tray, and 2 sliding
• All joints are glued and fastened with 2” screws
• Will fit with or without wood box liner
• All edges rounded over and sanded
• Stain and wood preserver applied after assembly
• Can custom build for specific needs

• Box is 48” wide, 17” high and 24” deep
• Comes with hasp
• All joints are glued and fastened with 2” screws
• All edges rounded over and sanded
• Constructed with 3/4″ select fir plywood
• Stain and wood preserver applied after assembly

• 48” long with 3 or 4 drawers
• Made for GMC, Ford or Dodge
• Constructed with 3/4″ select fir plywood
• All joints are glued and fastened with 2” screws
• Stain and wood preserver applied after assembly
• Can custom build for specific needs

• 16”, 18”, 20” or 24” tool box
• Made for GMC, Ford or Dodge full size pickups
• Constructed with 3/4″ select fir plywood
• 2 lids with hasps and lid supports
• Lids overlap to minimize snow and dust
• 1 screwdriver rack, 1 lift out tray, and 2 sliding
• All joints are glued and fastened with 2” screws
• Will fit with or without wood box liner
• All edges rounded over and sanded
• Stain and wood preserver applied after assembly
• Can custom build for specific needs

• 48” wide, 8” high
• Drawer height 5.5”, width 13.75”
• Made for GMC, Ford or Dodge
• Strong enough to carry quad or snowmobile on top
• Outside box made with 3/4″ plywood
• Drawers made with 3/4″ and 1/2″ plywood
• Comes with 1/4″ puck board sliders
• Stain and wood preserver applied after assembly
• All joints are glued and fastened with 2” screws
• Can custom build for specific needs

• Constructed with 3/4″ select fir plywood
• At least 48” between wheel wells on all GMC, Ford or Dodge full size pickups, long or short box
• Underrail option available
• All joints are glued and fastened with 2” screws
• All edges rounded over and sanded
• Comes fully assembled
• Stain and wood preserver applied after assembly

• From 7” with 24” in length (depending on box size)
• Driver’s side comes with lift out tray
• Passenger side built to accommodate booster cable and tow rope
• Made for GMC, Ford or Dodge
• Constructed with 3/4″ select fir plywood
• Stain and wood preserver applied after assembly
• All joints are glued and fastened with 2” screws
• Can custom build for specific needs